945 Boulevard du 30 Juin, Gombe, Kinshasa, Democratic Republic of the CongoFrançais
AXORA technical visualisation illustrating Plumbing

PLB · AXORA EXPERTISE

Plumbing

Deliver usable water, adequate pressure and reliable drainage under every operating condition.

Coordinated design of water supply, storage, boosting and drainage systems matched to building use.

RevitAutoCADNavisworks
AXORA TECHNICAL VISUALISATION — ILLUSTRATIVE IMAGE

DISCIPLINE OUTCOMES

Expertise tied to actual building performance.

AXORA connects sources, storage, treatment, pumping, distribution, hot-water generation, drainage and maintenance in a coordinated plumbing architecture.

01

Water availability

Demand, autonomy, storage, make-up and continuity are defined from actual use.

02

Controlled pressure

Zoning, boosting, pressure reduction and velocity limits protect comfort and equipment.

03

Hygiene

Water quality, temperatures, stagnation, draining and maintenance guide the design.

04

Reliable drainage

Falls, venting, access, lifting and outlets are coordinated with structure and architecture.

SYSTEM ARCHITECTURE

From input data to a tested system.

Each layer produces verifiable information for the next. Interfaces are resolved before construction and confirmed through testing.

01

Source and storage

Confirmed utility, borehole or other source, tanks and autonomy.

02

Treatment and pumping

Filtration, disinfection as required, boosting, lifting and redundancy.

03

Distribution

Cold water, hot water, recirculation, zoning and balancing.

04

Fixtures and use

Draw-off points, sanitary fixtures, kitchen, laundry and specialist demands.

05

Drainage and discharge

Wastewater, soil, rainwater, venting, treatment and confirmed discharge points.

DESIGN INPUTS

No serious sizing without explicit inputs.

AXORA starts by qualifying available inputs, gaps and their impact. An assumption remains identified until confirmed.

  1. 01Population and use profiles
  2. 02Available water source, flow and quality
  3. 03Required storage autonomy
  4. 04Building levels and geometry
  5. 05Fixtures, flows and temperatures
  6. 06Outlets, sanitation and maintenance constraints

TECHNICAL CAPABILITIES

A complete scope adapted to the project stage.

The final content depends on the contract, confirmed inputs and requirements applicable to the project.

PLB · 01

Demand and storage estimates

PLB · 02

Boosting and pressure zoning

PLB · 03

Domestic hot water and recirculation

PLB · 04

Water treatment based on available analyses

PLB · 05

Cold- and hot-water networks

PLB · 06

Gravity drainage and lifting

PLB · 07

Rainwater and attenuation where required

PLB · 08

Instrumentation, levels, alarms and supervision

MULTIDISCIPLINARY COORDINATION

Quality is decided at the interfaces.

AXORA treats dependencies between systems as design, construction and testing requirements.

Architecture

Shafts, wet areas, ceilings, falls, access and sanitary fixtures.

Structure

Openings, tank loads, supports, penetrations and pits.

Electrical

Pumps, water heaters, treatment, controls, protection and standby supply.

Automation

Levels, pressures, faults, leaks, solenoid valves, alarms and trends.

AXORA METHOD

From intent to the as-built package.

01

Scoping and data

Confirm uses, boundaries, available data, requirements and responsibilities.

02

Design basis

Document assumptions, criteria, options and approval conditions.

03

Calculations and architecture

Size functions and structure systems before detailed design.

04

BIM coordination

Bring spaces, networks, equipment, access and interfaces into a coordinated model.

05

Construction package

Produce drawings, diagrams, details, schedules, quantities and specifications.

06

Delivery and control

Check equipment, layouts, installation, changes and document compliance.

07

Testing and commissioning

Verify every point, function and integrated scenario before acceptance.

08

Handover and maintenance

Provide as-builts, backups, training, instructions and a follow-up plan.

DELIVERABLES

Documents that support decisions, construction and maintenance.

Demand estimatesNetwork sizingLayouts and risersSystem schematicsInstallation details

DOCUMENTED AXORA PROJECTS

Real project contexts, with no extrapolation beyond the documented scope.

The visuals below come from project files recorded on the site. Each project page states the documented scope; an image alone does not prove progress status or performance.

How to read the images

Discipline hero images are AXORA technical visualisations. Cards in this section correspond to documented projects. Construction or completed-work photographs will only be labelled as such after their source has been supplied and verified.

FREQUENTLY ASKED QUESTIONS

Points to clarify before design.

Can a tank be sized from floor area alone?

No. At minimum, uses, population, demand profiles, source and required autonomy are needed.

Is building height enough to select a pump?

No. Flow, pressure losses, residual pressure, zoning, variable speed and suction conditions are also required.

Can a pipe diameter be identified from an image?

No. Diameters must be determined from flows, lengths, pressure losses, velocities and project requirements.

Does leak detection always shut off the water?

Only when a suitable valve, approved logic and safe reset conditions are provided.

TECHNICAL REFERENCES

Official sources with controlled applicability.

These resources support the method but do not automatically become the contractual framework for a project in the Democratic Republic of the Congo. Edition, scope and applicability are confirmed during scoping.

YOUR PROJECT

Let us turn your Plumbing requirements into a coordinated, calculated and testable system.

WhatsApp